While you're there, check that the amp is of the digital passthrough type - it should be marked on the amp or within the instruction manual. Magic eye setup problems? tvtradedave 209.042 görüntüleme 6:02 Sky Magic Eye Installation, Problems & Solutions - Süre: 7:12. You do it at your own risk. http://techese.net/tv-link/tv-link-not-working-with-sky-hd-box.html
Many digital-ready TV sets also have an analogue tuner as well. Check it is working properly by plugging it into the TV link RF2 socket and am getting constant red light on magic eye.The TV link is a Triax brand with RF1 To check, key Services > Settings > Picture. If these are already in use make sure that you can not pull them off the end of the cable easily, as this will mean they are badly fitted. news
If you can, try bypassing your booster to see if the problem goes away - this will help to confirm whether the problem is with your booster or not.Reboot your Sky Ask in our satellite TV forumOn our other pages:Get Sky in another Room - Details of how to watch Sky around your homeSky FAQ - Your Sky questions answeredSubscription-free TV - Choose from over 1,000 movies on demand, including recent box office hits with the Sky Movies Bundle. > Explore My Sky OffersThinking about upgrading your Sky package? RF2 outlet not working.Also click HERE to determine what you need to order. "Sky eye not working.
In addition, the down-lead from the TV aerial should be double-screened for at least the bottom two metres. Here's a photograph (below). This creates an impedance mismatch that can be cured by installing a small piece of coax cable between the tvLINK and the second TV. Sky Magic Eye Stopped Working Fit the tvLINK to the end of the cable but do NOT connect it to the second TV, does it now work like this?
How do I set up my TV Link?How to wire up a TV Link Sky Magic Eye Installation. Mark39 wrote:A recent upgrade to your Sky box may be the cause. Go figure, but I never had any issues with my sky+ box, but now with the HD one the eyes do seem to be hit and miss and quite frequently they https://www.sky.com/help/articles/set-up-a-tvlink-to-watch-sky-tv-in-another-room DISCLAIMER If you damage your TV Link or anything else by doing this, it isn't my fault!
Point a Sky remote at the receiver, and it sends a signal down the aerial wire back to a Sky box and changes the channel.Where do I get a Sky TV Tv Link Not Working With Sky Hd Box If the answer is 'YES' install a short length of coax between the tvLINK and the second TV, this will change the impedance and hopefully cure the problem. Do the same with any devices connected to your Sky box. Sky magic eye fitting Bought it from SatCure?
Ultra-thin coaxial cable We can supply ultra-thin white cable if you want it to be as unobtrusive and flexible as possible. A distance of 3 metres is required in the case of some large flat screens! Tv Link Magic Eye No Red Light Channel 68 (default) which corresponds to 847 MHz Place the sensor part of Sky eye facing towards the seat which will be used by viewers Use Sky remote to change channels Sky Magic Eye Remote Not Working Using the tvLINK, will I only be able to see the Sky digital channel on my other TV?
This fact dictates that the complete run of cable from the aerial down to the first box that it plugs into should be double-screened and *without* any in-line connectors or sockets. http://techese.net/tv-link/tv-link-sky-not-working.html Can I also watch my VCR on my other TV? Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Abuse on 26-05-2014 05:11 PM Glad you've fixed it - thanks for letting us AEI Security & Communications Limited 134.991 görüntüleme 8:46 AWESOME SKY TV Build for KODI [100% FREE SKY TV] Step By Step Guide *2016* - Süre: 2:57. Sky Magic Eye Setup
If the above does not help our highly recommended Installer guide is available from http://www.tvlink.co.uk/installers-guide.htm I have a Sky HD STB, how do I turn on RF out 2? joetwizzy 1.387 görüntüleme 0:46 How to watch digital channels without cable TV or satellite for FREE? - Süre: 3:24. Another cable was run from the RF OUT on the Sky box back up the roof to theTV link 4 way signal booster for distribution to the other two bedrooms. navigate here Report Abuse Post 6 of 93 51,951 Views Reply 0 Likes Mark39 Oracle Posts: 30,120 Joined: 30-11-2010 Re: It would be useful to narrow down where the problem lies....
Didn't buy your "magic eye" (or anything else) from SatCure? Sky Tv Link Remote Not Working unplug coax at both ends tv and sky box turning off the second output in the installer menu leaving it 10 mins connecting it back up and turning on the second I tried everything, linking the eye to the box directly powering it off and on, tried different eyes on different tv's.
Oturum aç 88 20 Bu videoyu beğenmediniz mi? Yükleniyor... Çalışıyor... This amplifier was provided with power via the coaxial cable system in the house from a power unit on the ground floor. No Red Light On Magic Eye If you want to enjoy different shows on separate TVs around your home, for instance a football match in one room and a kids’ show in another, you’ll need Multiscreen. Get started
This is most easily arranged by stripping the guts out of a wall plate socket and gluing in a suitable female coaxial plug. (This can be of the usual TV "IEC" Double check that all your coax connections, especially the middle pin, are crimped or soldered properly. If you see a setting for HDMI Control, try turning it off and saving your settings. his comment is here tvtradedave 456.721 görüntüleme 7:52 How to Install and Setup an IO Link - Süre: 4:53.
If it does, then the problem almost certainly is in your wiring - if it doesn't, it's either the magic eye, or the box. Can I use a tvLINK? Oturum aç 21 Yükleniyor... To turn on the RF2 in the installer menu of your Sky set-top box: Using your Sky Remote control in front of your Sky set-top box: Press the SERVICES button.
Send this page address - CLICK HERE - to a friend ! Report Abuse Post 15 of 93 49,331 Views Reply 0 Likes « Previous 1 2 3 7 Next » « Back to Board « Previous Topic Next Topic » Top I have a digital-only TV set - Can I use a TV LinkTo use a feed from the Sky RF2 output, your TV will need an analogue tuner, not a digital Now put the main body of the connector on.
Make sure it can't touch anything else. LED IS lit - I have installed my TV Link as per the TV Link - Installation page but it does not work. I have lost my tvLINK instruction guide. If you see a setting for HDMI Control, try turning it off and saving your settings.
If the answer is 'NO' however, there may be a piece of equipment in line that's stopping the DC getting back to the Digibox. For you, we offer our Magic Eye Guide (above). You can use our bypass kit to route the control signal around another manufacturers splitter amplifier.