Loading... Yes No OK OK Cancel X Skip navigation UploadSign inSearch Loading... Make sure each light is grounded to the trailer frame and that the connection to the trailer frame is free of rust, paint and corrosion. The days of just crimping into the tail light harness are long gone. Check This Out
Take your test light and find a good ground and use the probe to alternately touch each of pins inside the connector. rpeek 88,516 views 4:21 This Old Trailer: Finding and Fixing Wiring Shorts - etrailer.com - Duration: 5:25. Cant ask for anything more than that. If you see the same thing - then you have eliminated the truck connector and cable as a problem source.Trailer:Tools needed: Automotive Test light (best) or Volt meter (set to 12 https://www.etrailer.com/question-31328.html
trailer that has the 7way wiring. You currently have 0 posts. THANKS!!!!! This shows that my left side light and wiring are OK.
Trace each circuit back to the fixture, looking for broken or pinched wires, or wires with worn or cracked insulation.The chances are excellent that one of these issues is causing your I am including a link to a FAQ page on trailer wiring.If the wiring is all correct then you will need to check the trailer connector on the vehicle and trailer Today 08:13 PM by RJC2 0 94.5-97 OBS HPOP LINES Today 08:09 PM by [email protected] 11 2 Attachment(s) Custom ford emblems Today 08:08 PM by mjharland2 4 Help me decide Today Trailer Brake Lights Dont Work But Turn Signals Do Sign in Transcript Statistics 126,708 views 29 Like this video?
I would try a few simple things first. Thankfully I was given one by someone who sold their van. That could be the problem also. ___________________________________ 2004 GMC Sierra Z71 2008 Quick 36 2002 JD HD75 54 Echo PB403 Stihl FS-55 JD X140LE Gavin Lawn Care Reisterstown, Maryland Gavin https://www.etrailer.com/question-31328.html Try cleaning it.
www.facebook.com/trudeaulandscape F350 Lariat P/U F350 XLT P/U F450 XLT Dump Fisher Xtreme Vees 22' Enclosed Trailer 16' Open Trailer 14' Dump Trailer 10' Open Trailer Redmax 2stroke Equipment Walker, Wright Stander, Trailer Turn Signals Not Working Up next How To Troubleshoot Trailer Wiring Issues or Problems - Duration: 6:43. Working... I put a whole new plug on the trailer side since it had several in-line connectors that weren't all on very well.
The test light should alternately go on and off - if not your problem is in the connector. his comment is here Comment Cancel Post island5278 Cadet Join Date: Apr 2011 Posts: 7 #11 April 13th, 2011, 02:59 PM Re: left turn signal and brake light not working on trailer No. ect..... I have included a link to this article below.expert reply by: Michael HClick to EnlargeAsk your question or add a comment to this product question?Name: (example: John S.)Contact email: * please Trailer Turn Signals Work But Not Brake Lights
Just replaced the (2) 7.5 amp fuses, and it works like a champ. RedMax Man, Jul 31, 2007 #7 mike33087 LawnSite Member from North of Boston Posts: 108 mine did that and i replaced the bulbs and everything worked again ___________________________ Northeast Property Thanks for your time and Videos Please help asked by: Dave MExpert Reply:It sounds like you might have a bad ground connection. http://techese.net/turn-signal/trailer-brake-lights-and-turn-signals-not-working.html I Will Purchase again!!!!!!!
RedMax Man, Jul 30, 2007 #4 SiteSolutions LawnSite Bronze Member from Huntsville, AL Posts: 1,114 RedMax Man said: ↑ Thanks guys i found the problem, several of the wires were frayed Trailer Brake Lights Work But Not Running Lights Lawns, and the LawnSite community in the Franchising forum . Check for a bad ground, loose connection, and dirt and corrosion.
You will want to check if they are installed and working properly.The next thing is to make sure the wires on the trailer plug is wired properly to the trailer. If the wiring and socket are good then you your test light should light at one of the contacts. You will want to check if they are installed and working properly.The next thing is to make sure the wires on the trailer plug is wired properly to the trailer. Running Lights Work Brake Lights Dont click here.Products Referenced in This QuestionUpgraded Modulite Vehicle Wiring Harness Kit with 4 Pole Trailer Connector (Includes Install Kit) 36 reviewsCode: 119147KITRetail:$93.11Price:$51.89WiringTrailer ConnectorsVehicle End Connector4 FlatPlug and LeadTekonshamore information > Circuit
Stepping on the brakes would then add more and this is when a ground problem will usually show up. The days of just crimping into the tail light harness are long gone. I replaced the converter, then everything looked good on the truck plug, but amazingly, my running lights stopped working on the trailer, despite everything else looking good. navigate here Go to page 175 http://www.motorcraftservice.com/pub.../01f23og4e.pdf 2002 F-250 4x4 EC, SRW, SB Auto 93,000 miles DP Tuner F5 ATS Compressor and 1.0 Exhaust housing high flow back plate Turbo Back 4" Silverline
Comment Cancel Post island5278 Cadet Join Date: Apr 2011 Posts: 7 #3 April 12th, 2011, 02:18 PM Re: left turn signal and brake light not working on trailer It doesn't seem Test each pin as its function is activated. Thanks Again! I tested the female plug on the truck side to see if I was getting power to it, and it is not.
Most people give up and just get their speech ready for when and if they do get stopped by law enforcement. Trace that wire all the way to the right side signal light. It requires you to remove the tail lamps, unplug the electrical plugs for the lamps, install a jumper connection on each side of the car, and then run the harness behind twilson is offline Quote Quick Reply post #5 of 17 Old 03-12-2008, 04:51 PM pipelayerjdh BIG TRUCK, SMALL DRIVER Join Date: Oct 2006 Location: Iva, SC Posts: 5,877
Many vehicles require additional wiring and / or components for the trailer wiring to work properly due to the computer controls of the vehicle in question. ect..... I am including a link to a troubleshooting video that should help you with locating the problem on your trailer.expert reply by: Jeff DAsk your question or add a comment to You currently have 0 posts.
Thanks. Everything works. The solution was to run ground wires from the lights to the front of the trailer. Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More...
As a first step, you will want to use a circuit tester such as part # 40376 and test the trailer connector on your Grand Cherokee. etrailer.com 99,852 views 5:25 This Old Trailer: Troubleshooting the Ground Wire - etrailer.com - Duration: 3:31. UCanDoIt2 131,953 views 28:42 Use a multimeter toTroubleshoot trailer lights.