Press the arrow button on the projector until the menu cursor moves to the projector set up menu. The data projector has several input sources, one for video, one for analog RGB (computer), one for the internal camera and one for S-VHS video. Press the input button on the remote control or on the data projector to cycle through the inputs. The data projector fan will continue to run until the lamp cools. Source
Connecting a Laptop Computer to the Toshiba TLP 261Data Projector 1. Connect the female end of the power cable to the "AC IN" plug on the data projector, and the other end to a standard electrical outlet. 2. Continue to press the input button until "analog RGB" is displayed on the screen; this is the computer input. Turn on the data projector using the oval shaped "on/standby" button seen in the photo above. 5. http://www.tomshardware.com/answers/id-1996948/connected-toshiba-laptop-lcd-projector-control-panel-device-printers-connect-projector-extern.html
Under "computer" choose Analog RBG or Y/Pb/Pr whichever your computer requires. 7. When finished, press the "on/standby" button to turn off the lamp. Consult the laptop instructions to learn how to toggle the computer image between the laptop monitor and the data projector (Usually a simple combination of key strokes such as holding down Press the button and wait about 5 seconds to allow the projector to recognize the new input.
Connect the other end of the computer cable to the COMPUTER IN port on the side of the data projector shown in the photo above. 3. B.Press the data projector "Menu" button two times. The data projector lens has two adjustment rings on it. Toshiba Satellite Connect To Projector Connect the 15 pin computer cable to the RGB OUT or Monitor Out port on the laptop computer.
Revised 09-06 Send comments about this page to Tom Gill, Instructional Media Coordinator [email protected] If all of the above procedures are complete, and the image on the laptop monitor does not display on the data projector, try one of the following: A. You will see an on screen menu. https://www.techwalla.com/articles/how-to-connect-a-toshiba-laptop-to-a-projector Please do not unplug the projector until the fan stops.
One is the zoom control (controls the size of the projected image), and the other is the focus control. 8. Toshiba Laptop Wont Connect To Projector Wait a few more seconds for the computer image to appear. 6. Use the arrow down button to move to the "Input Source" settings. Turn on the laptop computer following the instructions provided by the manufacturer. 4.